Operating Instructions With Keypad Input; Setting The Limits - Promax FA-405 Manual

Programmable power supply
Table of Contents

Advertisement

Available languages

Available languages

USER'S MANUAL FA-405
b) Press the AC power On/Off switch
Attention: The earth connector in the front of the instrument and
Before operating the instrument each time, first check and ensure that the supply
output cables of the instrument is well fit of no damage.
4.4

Operating Instructions with keypad input

4.4.1 Setting the limits

The voltage, current and power output values are each limited to a maximum. This
upper limit can be varied downwards. Setting the limits is carried out using the "V
LIMIT" "I LIMIT" "P LIMIT" keys as follows:
V LIMIT
Voltage limit
Press the "V LIMIT" key in the "LIMITS" field until the symbol "U-const"
flashes. The voltage limit can now be adjusted to 1V steps by using the
encoder wheel. If the "V LIMIT " key is now pressed for longer than 2s,
the voltage upper limit will again be set at "maximum voltage value"
(40V). To complete the input, press the "ENTER" key. An inadvertently
wrong-set limit setting can be erased/reset with the " CE " key. As a
result of this, the previous set value will be indicated and the setting
menu exited. The "U-const" will no longer flash.
During operation, the voltage output can also be adjusted up to the set
limit.
I LIMIT
Current limit
Press the " I LIMIT" key in the "LIMITS" field until the symbol "I-const"
flashes. The current limit can now be adjusted to 10mA ("FINE") or
100mA ("NORM", coarse) steps by using the encoder wheel. If the "I
LIMIT" key is now pressed for longer than 2s, the current upper limit will
again be set at "rmaximum current value" (5A). To complete the input,
press the "ENTER" key. An inadvertently wrong-set limit setting can be
erased/reset with the " CE " key. As a result of this, the previous set
value will be indicated and the setting menu exited. The "I-const" will no
longer flash.
12/2003
the RS-232 interface connector earth are connected
directly with the earthing wire of the AC power input
socket and of the connected AC power socket.
Page 11

Advertisement

Chapters

Table of Contents
loading

Table of Contents