Safety Rules; General - Promax FA-405 Manual

USER'S MANUAL FA-405

2. SAFETY RULES

2.1 General

* Use this equipment connected only to systems with their negative of
measurement connected to ground potential.
* This is a Class I equipment, for safety reasons plug it to a supply line with the
corresponding earth connection.
* This equipment can be used in Overvoltage Category II installations and Pollution
Degree 1 environments.
* When using some of the following accessories use only the specified ones to
ensure safety.
Power cord CA-005
* Observe all specified rating both of supply and measurement.
* Remember that voltages higher than 60 V DC or 30 V AC rms are dangerous.
* Use this instrument under the specified environmental conditions.
* The user is only authorised to carry out the following maintenance operations:
Replace the mains fuse that must be of the type and value specified.
On the Maintenance paragraph the proper instructions are given.
Any other change on the equipment should be carried out by qualified
personnel.
* Do not obstruct the ventilation system of the instrument.
* Follow the cleaning instructions described in the Maintenance paragraph.
12/2003 Page 3