Promax FA-405 Manual page 66

I
Function: The maximum current limit at present, the unit is A.
Syntax: I<cr> HEX = 49 0D
Explain: When the message of I<cr>is sent to the power supply from computer,
the power supply will return the following message immediately:
The contents consist of the uppercase I, the numeral from 0 to 9 and
decimal. Further details is described as follows:
When the uppercase I becoming the lowercase i means that the power
supply is in the setting status of current limit mode.
P
Function: The maximum output load limit at present, the unit is W.
L<cr>
Syntax:
When the message of L<cr>is sent to the power supply from computer,
Explain:
the power supply will return the following message immediately:
The contents consist of the uppercase P and the numeral from 0 to 9.
Further details is described as follows:
When the uppercase P becoming the lowercase p means that the power
supply is in the setting status of output load limit mode.
F
Function: The present status of the power supply.
Syntax: F<cr> HEX = 46 0D
Page 22
Ii.iii<cr> 5 characters totally + CR/LF
i.ii = The maximum current limit at present, the unit: A
HEX = 50 0D
Pppp<cr> 4 characters totally + CR/LF
ppp = The maximum load limit at present, the unit: W
USER'S MANUAL. FA-405
12/2003