Measured Value Output - HEIDENHAIN ND 282B User Manual

Measured Value Output

For technical information on the BCD data inter-
face (X33), information on the data format, etc.,
see the chapter "BCD Interface (X33)."
Measured values can be output over the BCD interface (X33).
There are several ways to start measured value output:
ä
Press MOD repeatedly until the PRINT indicator blinks
(only for"slow" data output), then start data output with
ENT;
or
ä
Let the measured values periodically be sent to the data
output;
or
ä
Input a latch command at the D-sub connection EXT;
or
ä
Input a latch command at the BCD connection.
Interface Operating Mode (see Operating Parameter P53)
slow– Display value
fast – Display value referenced to datum 1
(MIN/MAX/DIFF display values are not shown)
13