Connecting To A Computer And Power - Huawei HES-319M Installation Manual

Connecting to a Computer and Power

At this point, only connect your computer to the IDU. Connect the customer's equipment only after activating
the service.
1. Plug one end of the supplied Ethernet cable into the RJ–45 port on the IDU labelled "IN".
2. Plug the other end into the Ethernet port on your computer.
3. Plug the power cord into the IDU and a 120VAC power source.
4. Power up your computer.
You are ready to align the ODU.
HES-319M Installation 30