VertX V2000 (CS) Quick Installation Guide
5. Enter the IP address 10.19.4.130. If the VertX board's IP address is different than what is
shown, the computer IP address must be modified accordingly. The two IP addresses need to
be in line with each other and separated by one digit (for example: 10.19.4.130 is one digit
greater than 10.19.4.129).
6. Enter the Subnet mask: 255.255.0.0.
7. Enter the Default gateway: 10.19.0.1.
8. Click OK.
9. Click the OK button again to complete the computer configuration.
10. Restart your computer.
August 2005
2005 © HID Corporation. All rights reserved.
Page 13 of 23