Reset Temperature/Humidity Readings; Set Weather Alerts; Weather Alerts - La Crosse Technology 327-1417 Instructional Manual

Reset Temperature/Humidity Readings

:
• Press the TEMP button to view individual HI | LO readings.
• Hold the MINUS button for five seconds to reset each individual value.
• Individual readings will reset to current temperature, humidity, etc.

Set Weather Alerts

• Hold the ALERTS button for 3 seconds to enter alert set mode.
• High Wind Speed ON | OFF will flash.
Alert ON:
1. Press the +/- buttons to arm the alert.
2. Press the ALERTS button and the alert value will flash
3. Press the +/- buttons to set the alert value (Hold to set quickly).
4. Press ALERTS button to move to next alert.
Alert OFF:
1. Alerts are OFF unless armed. If you do not wish to set an alert, simply press the
ALERTS button again to move to the next alert.
Alert OFF use +/- to arm (turn on) Alert ON use +/- to set value

Weather Alerts

Here is the setting order for the 9 programmable alerts.
• High Wind Speed ON/OFF (CURRENT wind)
• High Wind Speed Value 0-99mph (0-159kph)
• Outdoor LOW Temperature ON/OFF
• Outdoor LOW Temperature Value -40°F to 140°F (-40°C to 60°C)
• Outdoor HIGH Temperature ON/OFF
Back
• Outdoor HIGH Temperature Value -40°F to 140°F (-40°C to 60°C)
to
Top
327-1417 Color Wind Speed Weather Station Page | 9