Table of Contents
Advertisement
Connect Add-on Sensors to Station
• The wind station will accommodate up to two additional (TX141TH-BCH)*
Thermo-Hygro sensors on channels 2 & 3.
*Additional sensors sold separately & can be purchased here:
www.lacrossetechnology.com/tx141th-bch-temperature-humidity-sensor
Note: No additional TX144W wind speed sensors may be added.
Connect add-on sensor(s) to the wind station:
1. Remove the battery cover from all add-on sensors (leave off ).
2. Set the first additional sensor to Channel 2 and insert 2 "AA" batteries.
3. Set the second additional sensor to Channel 3 and insert 2 ""AA"" batteries.
4. Hold the TEMP button on the station for 3 seconds to search for sensors.
5. Press the TX button on each sensor.
6. When connection is established, the temperature and humidity for each of the
selected channels will appear.
7. Install the battery covers on each sensor.
8. Keep sensors and the wind station 5-10 feet apart for 15 minutes for a solid
connection.
9. After 15 minutes, place the remote sensors in appropriate shaded locations.
10. Press and release the -/CH button to view channels 1,2 or 3 on the wind station.
Note: CH 1 will show consistently. CH 2 and CH 3 will only show if sensors are
connected to the station on those channels.
View Channels (when add-on sensors in use)
• Press the -/CH button to toggle between
remote sensor channels when multiple
sensors are used.
• Channels are indicated with CH 1, CH 2 or
CH 3, in the outdoor temperature area.
Note: When using multiple TH sensors,
select the channel by pressing the
-/CH button prior to viewing HI | LO
readings or setting temperature/humidity
Alerts
327-1417
Color Wind Speed Weather Station
CH 1
Back
Top
Page | 13
to
Hide quick links:
Advertisement
Table of Contents
