Table of Contents
Advertisement
Resistance:
•
Each obstacle: walls, windows, vegetation, stucco, concrete, and large metal objects will
reduce the effective signal range by about one-half.
•
Mounting your sensors on a metal fence can significantly reduce the effective signal range.
Interference:
•
Consider electronics in the signal path between your sensor and your station.
•
Simple relocation of your sensor or the station may correct an interference issue.
•
Windows can reflect the radio signal.
•
Metal will absorb the RF (radio frequency) signal.
•
Stucco held to the wall by a metal mesh will cause interference.
•
Transmitting antennas from: ham radios, emergency dispatch centers, airports, military
bases, etc. may cause interference.
•
Electrical wires, utilities, cables, etc. may create interference if too close.
HOW DO I VIEW MY HI AND LO TEMPERATURE/HUMIDITY READINGS?
The high and low temperature and humidity readings are recorded with time and date of
occurrence. Each time a new high or low reading is recorded, that reading with time and date of
occurrence will show.
Color Station:
To view your HI | LO records, simply press and release the PLUS (+) button.
•
Outdoor HI Temperature
•
Outdoor LO Temperature
•
Outdoor HI Humidity
•
Outdoor LO Humidity
•
Indoor HI Temperature
•
Indoor LO Temperature
•
Indoor HI Humidity
•
Indoor LO Humidity
Mini Display: NONE
HOW DO I RESET THE TEMPERATURE/HUMIDITY READINGS?
Color Station
Your temperature and humidity readings are reset individually.
1. Press and release the PLUS (+) button to view the reading you wish to reset.
2. Hold the MINUS (-) button for 5 seconds to reset individual temperature or humidity value to
current temperature, humidity, time and date.
3. Press and release the LIGHT button to exit.
4 |
P a g e
Hide quick links:
Advertisement
Table of Contents
