Active Alert; Temperature/ Humidity Trend Arrows - La Crosse Technology 327-1417 Instructional Manual

• Outdoor LOW Humidity ON/OFF
• Outdoor LOW Humidity Value 10%RH to 99%RH
• Outdoor HIGH Humidity ON/OFF
• Outdoor HIGH Humidity Value 10%RH to 99%RH
• Indoor LOW Temperature ON/OFF
• Indoor LOW Temperature Value 32°F to 99°F (0°C to 37°C)
• Indoor HIGH Temperature ON/OFF
• Indoor HIGH Temperature Value 32°F-99°F (0°C to 37°C)
• Indoor LOW Humidity ON/OFF
• Indoor LOW Humidity Value 10%RH to 99%RH
• Indoor HIGH Humidity ON/OFF
• Indoor HIGH Humidity Value 10%RH to 99%RH

Active Alert

• When armed alert value is reached, station will beep 5 times each minute, until
out of alert range.
• The flashing alert icon will indicate which alert is sounding.
• Press any button to stop the alert sound.
• The alert icon will flash while value is in alert range.
Disarm Alert:
1. Hold the ALERTS button for 3 seconds to enter alert set mode.
2. Press and release ALERTS button until you see the alert you wish to disarm.
3. Press the +/- buttons to disarm the alert.
4. Press the LIGHT button to exit.
Temperature | Humidity Trend Arrows
• The temperature and humidity trend arrows update every 15 minutes. The trend
reflects changes (2°F and 3% humidity) over the past 1 hour. E.g.: At 1:00 - compare
to 12:00 data; at 1:15 compare to 12:15: at 1:30 - compare to 12:30 ..... etc
Up Arrow: Rising
327-1417
Right Arrow: Steady
Color Wind Speed Weather Station
Down Arrow: Falling
Back
Top
Page | 10
to