Fxs Port Page Definitions; Table 9: Fxs Port - Grandstream Networks HT801 Administration Manual

Syslog Level
Selects log level; the level is one of DEBUG, INFO, WARNING, ERROR. Syslog
messages are sent based on the following events. Default is NONE:
The Syslog uses USER facility. In addition to standard Syslog payload, it contains the
following components: GS_LOG: [device MAC address] [error code] error message.
Example:
Ethernet link is up
Send SIP Log Configures the HT801 to send a replicate of the SIP packets on the syslog. Default is
No
Download Device Downloads actual device configuration file in .xml format.
Configuration
Download Device Downloads actual device configuration file in .xml format.
XML Configuration
Upload Firmware Allows the user to upgrade the firmware with a single firmware file by browsing and
loading the file from your computer (local directory).
Upload Allows users to upload the configuration file by browsing and loading it from computer
(local directory).
Configuration

FXS Port Page Definitions

FXS Port
Accounts Active
Activates / Deactivates the accounts. The FXS port configuration will not change if
disabled, although the port will not be operational, in this state, there will be no dial tone
when picking up the analog phone, and making/receiving calls will not be possible.
1. product model/version on boot up (INFO level)
2. NAT related info (INFO level)
3. sent or received SIP message (DEBUG level)
4. SIP message summary (INFO level)
5. inbound and outbound calls (INFO level)
6. registration status change (INFO level)
7. negotiated codec (INFO level)
8. Ethernet link up (INFO level)
9. SLIC chip exception (WARNING and ERROR levels)
10. memory exception (ERROR level)
May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000]

Table 9: FXS Port

HT801 Administration Guide
P a g e | 26