Grandstream Networks HT801 Administration Manual page 25

Disables the SIP NOTIFY Authentication on the phone adapter. If set to "Yes", the phone
Disable SIP
NOTIFY adapter will not challenge NOTIFY with 401. The default setting is "No"
Authentication
Authenticate Authenticates configuration before being accepted. This protects the configuration from
Conf File unauthorized modifications. Default is No.
SIP TLS Certificate Specifies SSL certificate used for SIP over TLS is in X.509 format. The HT801 has built-
in private key and SSL certificate.
SIP TLS Private Specifies TLS private key used for SIP over TLS is in X.509 format.
Key
SIP TLS Private Specifies SSL Private key password used for SIP Transport in TLS/TCP.
Key Password
Enable TR-069 Sets the phone system to enable the "CPE WAN Management Protocol" (TR-069).
Default setting is No.
ACS URL Specifies URL of TR-069 Auto Configuration Servers (e.g., http://acs.mycompany.com),
or IP address.
ACS Username Enters username to authenticate to ACS.
ACS Password Enters password to authenticate to ACS.
Periodic Inform Sends periodic inform packets to ACS. Default is No
Enable
Periodic Inform Sets frequency that the inform packets will be sent out to ACS.
Interval
Connection Enters username for ACS to connect to the HT801.
Request Username
Enters password for ACS to connect to the HT801.
Connection
Request Password
CPE SSL Certificate Configures the Cert File for the phone adapter to connect to the ACS via SSL.
CPE SSL Private
Specifies the Cert Key for the phone adapter to connect to the ACS via SSL.
Key
System Ring Sets ring cadences for all incoming calls.
Syntax: c=on1/off1-on2/off2-on3/off3;) Default is set to c=2000/4000; (US standards),
Cadence
HT801 Administration Guide
P a g e | 24