Interrogating And Erasing Fault Memory - Skoda Octavia1999 Service Manual

01
Test of vehicle systems
Select function XX
X faults recognized!
Test of vehicle systems
Select function XX
------------ 01-4 ------------
Self-Diagnosis
Interrogating and erasing fault
memory
Special tools, testers and aids required
♦ Vehicle system tester V.A.G 1552 with cable
V.A.G 1551/3
Procedure
- Connect vehicle system tester V.A.G 1552
and select engine electronics (address word
01); engine idling for this step ⇒ page 01-2.
Only if engine does not start:
- Switch on ignition.
K Readout in display:
HELP
- Press keys 0 and 2 for the function „Interro-
gate fault memory" and confirm the entry with
the key Q.
K The number of stored faults or „No fault recog-
nized!" appears in the display.
If one or several faults are stored:
The stored faults are displayed one after the
other.
K Readout in display:
HELP
- Press keys 0 and 5 for the function „Erase
fault memory" and confirm the entry with the
key Q.
Note:
If you have switched off the ignition between
„Interrogating fault memory" and „Erasing fault
memory", the fault memory is not erased.
OCTAVIA
Edition 07.99
S00.5126.50.20