Mifare ® Settings - Promag Mifare DESFire User Manual

DF7XX
PROMAG
REV.C
Offset/Length: (Default=0 / 5)
The Data file will depend on the value to output data. The Value file will be sent the value out. The Record
file will be sent the latest record data.
Access Key No/Value: (Default=0 / 00000000000000000000000000000000)
Key must be the same as the Read or Read/Write KEY of the card issued. This means DF7XX reader
only can read the data on the card with the same KEY.
®
2. Mifare Settings
Click "Card Type": "Mifare Only" or "Both", and this tab will be visibled.
MAD-AID: (Default=4703)
®
.net upon the customer's
MAD Application Identifier number is authorized and assigned by Mifare
®
request for registered Application Identifier in a mifare application open system (AID: 0000h~FFFFh).
Or it is also possible for the user to define the AID himself for the application in user defined closed
system without registering into MAD group. According to the AID, DF7XX reader can find and read the
corresponding sector on the MAD card.
8