Led / Buzzer Settings - Promag Mifare DESFire User Manual

PROMAG

4. LED / Buzzer Settings

Enable RS232 Command Set Control: (For 19200,n,8,1 Only)
RS232 LED/Buzzer command set frame as below:
STX J
02h 4Ah
Command Table:
NUMBER
0 (30h)
1 (31h)
2 (32h)
3 (33h)
4 (34h)
5 (35h)
6 (36h)
7 (37h)
8 (38h)
9 (39h)
Remark: If "Enable RS232 Command Set Control (for LED/Buzzer)" checkbox is checked, the
external LED/Buzzer control with high/low level control will be disabled.
NUMBER (0~9)
30h~39h
Descriptions
All LED Off, Buzzer Off
Green LED ON
Green LED OFF
Red LED ON
Red LED OFF
Buzzer Beep once
Buzzer Beep 3 Times
Green LED ON with Beep once
Red LED ON with Beep 3 Times
All LED ON (Orange)
CR
0Dh
11
DF7XX
REV.C