Test Reader After Update - Promag Mifare DESFire User Manual

PROMAG

9. Test Reader After Update

After reader's configurations have been updated success, you can use [Test] function to check reader's
configurations have been correctly stored.
1. After set configurations in the Reader Utility software, you can click [Update Reader] to update the
currently configurations to the reader.
2. Or, click [Test] to update configurations and verify output data.
3. Got an issued mifare
window.
Wiegand 34 bits output data with standard bit sequence, example as below:
®
card and approach the reader, you can see the output data on "Reader Test"
18
DF7XX
REV.C