DF7XX
PROMAG
REV.C
5. Wiegand Setting
Include Reader ID is to set the Wiegand output data to include Reader ID when it is enabled.
(Default=Disable).
Custom Premable is to set the Wiegand output data to include premable code when it is enabled.
This code only combines with CSN output.
(Default=Disable).
Number of Bits is to set the Wiegand output type you want to meet your Host (or Terminal). It can be 1 to
128 (Default=26).
Bit Sequence is to set the Wiegand output data sequence, it can be standard data sequence (MSB first)
or Reverse data sequence (LSB first). (Default=Standard).
Byte Order is to set the Wiegand output data sequence, it can be ISO (High byte first) or Non ISO (Low
byte first).
Alive Event is reserved.
13