Reader Settings - Promag Mifare DESFire User Manual

PROMAG

3. Reader Settings

Reader ID: (Default=0)
DF7XX Reader ID for multi link application.
Interface: (Default=Wiegand)
DF7XX reader can be set as Wiegand , RS232 or ABA-TK2 output.
Read Mode: (Default=Card Data Only)
a. Card Data Only: Read card sector data only; If any error (ex. mifare
"Card Invalid" status.
b. Card Data or CSN (Card Serial Number): Read card sector data, If any error (ex. mifare
reader will send the CSN to host.
c. CSN Only: CSN read only.
Output Mode: (Default=Once)
a. Once: Send data (or CSN) to host once.
b. Continue: Keeping sending data (or CSN) to host till card remove. Only for Mifare
(ID: 0~63)
10
DF7XX
®
key error), reader will show
®
®
Card.
REV.C
key error),