Carrier 38MAQB12-1 Service Manual page 60

DISASSEMBLY INSTRUCTIONS SIZE 18K (CONT)
2 Fan ass'y How to remove the fan
ass'y.
1) After you remove
the panel plate
(see section 1),
remove the hex
nut securing the
fan and then
remove the fan.
2) Remove the one
screw. Loosen the
hooks and open
the electronic
control box cover.
3) Release the fan
motor connector
and the four way
valve connector.
Electronic control box
Fan
Two reactors
Nut securing the fan
Four way valve connector
Fan motor connector
60
Compressor and
liquid-gas separator