E-Fly Wireless Dmx Set Up - Elation DW PENDANT User Manual

E - F L Y W I R E L E S S D M X S E T U P
BEFORE SETTING THE WIRELESS CHANNEL ON ANY E-FLY COMPATIBLE
FIXTURE, MAKE SURE THE SOURCE E-FLY TRANSCEIVER DEVICE IS OFF.
TO RECEIVE WIRELESS E-FLY DMX SIGNAL
1. Make sure the source E-FLY wireless DMX Transceiver device is powered OFF.
2. Power the fixture ON and set the wireless channel (0-14) in the Wireless Menu to
the same wireless channel of the source E-FLY DMX Transceiver network.
3. Turn wireless DMX to ON in the Wifly Menu.
4. Set the DMX Channel Mode in the Channel Menu.
5. Set fixture DMX address (001-512) in the DMX Mode Menu.
FIXTURE MUST BE IN
6. If a wireless DMX connection has been made with the fixture, the E-FLY™ signal
Indicator on the fixture will illuminate.
7. Repeat this process for all E-FLY compatible fixtures in your E-FLY wireless network,
making sure all fixtures are assigned the same wireless channel (0-14) and DMX
Channel Mode, wireless DMX is set to ON, and are all in DMX Mode Menu.
8. After all fixtures in your E-FLY wireless network have been set and powered ON,
then power ON the source E-FLY DMX Transceiver device.
MAKE SURE NOT TO NAVIGATE TO ANY OTHER SYSTEM MENUS ON ANY
OF THE FIXTURES IN YOUR E-FLY WIRELESS NETWORK ONCE YOU HAVE
ESTABLISHED A WIRELESS CONNECTION. DOING SO WILL DISRUPT THE
WIRELESS SIGNAL CONNECTION AND THE SOURCE E-FLY WIRELESS DMX
TRANSCEIVER DEVICE WILL REQUIRE A POWER RESET.
DMX MODE MENU
w w w . e l a t i o n l i g h t i n g . c o m
TO RECEIVE THE E-FLY WIRELESS SIGNAL.
18
DW PENDANT™ User Manual