Table of Contents
Advertisement
OPTIONS / VALUES
MENU
(Default Settings in BOLD)
DMX MODE
ADDR:001 - xxx
ADDR:xxx
CHANNEL
1CH, 2CH, 3CH, 4CH, 5CH, 6CH, 7CH
SLAVE
M O D E
Look
Store:01-23
Store :xx
Frequenc
1200Hz, 2400Hz, 4800Hz, 9600Hz
xxxxHz
Wireless
CH:00-14
CH:xx
Reset?
No, Yes
Manual
CW:000-255WW:000-255S:000-255
DimCurve
Standard, Stage, TV, Architec, Theatre
NO DMX
Hold, Blackout
TempUnit
F, C
Temp Val
000° F
AutoLock
OFF, ON
E-Fly
OFF, ON
w w w . e l a t i o n l i g h t i n g . c o m
ELATION© DW PENDANT™
S Y S T E M M E N U
Supports Software Versions: ≥ 1.03
Set Fixture DMX Address.
Set desired DMX Channel Mode.
Set unit to Slave Mode.
Select Internal Macro.
See INTERNAL MACRO MENU for more details.
Set LED Refresh Rate Frequency
to eliminate camera flicker and glare.
Set E-FLY Wireless DMX Channel.
MUST BE SET TO SAME CHANNEL OF TRANSMITTER
TO RECEIVE WIRELESS SIGNAL.
Reset fixture back to default settings.
Set RGBW and Strobe Values manually.
Set desired Dimming Curve Mode.
Define how fixture reacts when NO DMX signal present.
Set the value the fixture temperature is displayed.
Internal LED temperature reading.
Enable LCD display lockout feature which dims and locks
the display after no use for 30 secs. When LCD display is
locked, press and hold MODE button for 5 secs.
Enable internal E-Fly Wireless DMX Transceiver.
14
DESCRIPTION
DW PENDANT™ User Manual
Advertisement
Table of Contents
