D.1 Loi Menu Trees - Emerson Rosemount 2140 Reference Manual

Local Operator Interface
January 2017
Appendix D
D.1 LOI menu trees
Figure D-1. LOI Menu Tree (Main)
LOI MENU
VIEW CONFIG
TEST
DISPLAY
CALIBRAT
UNITS
RERANGE (*1)
EXTENDED MENU
EXIT MENU
(*1) Available only when the Primary Variable ("PV") is mapped to the Sensor Frequency or Scaled Variable device variables.
(*2) Not available for Rosemount 2140:SIS.
(*3) Available for Rosemount 2140:SIS.
(*4) Available for Rosemount 2140 with extended features package.
(*5) Not available for Rosemount 2140 with extended features package.
(*6) Displayed only when the PV is mapped to the Output State device variable.
(*7) Displayed only when the Current Output Operating Mode device variable is set to Custom and the PV is mapped to the Output State device variable.
(*8) Alarm level shown depends on setting of the hardware alarm level switch.
(*9) Available on SI units only.
Local Operator Interface
Local Operator Interface
TEST
DEVICE TEST (*2)
PROOF TEST (*3)
LOOP TEST
BACK TO MENU
EXIT MENU
DISPLAY
OUTPUT (on/off)
STATE (on/off)
FREQ (on/off)
RANGE % (on/off)
SCALED (*4) (on/off)
TEMP (on/off)
ANALOG (on/off)
VOLTAG (on/off)
STARTUP (on/off)
BACK TO MENU
EXIT MENU
RERANGE
ENTER VALUES
APPLY VALUES
BACK TO MENU
EXIT MENU
EXTENDED MENU
CALIBRAT
SENSOR
MEDIA
ASSIGN PV (*4)
SCALED VARIAB (*4)
DAMPING (*4)
TAG
ALARM VALUES (*5)
ALRM SAT VALUES (*4)
ANALOG OUTPUT
PASSWORD
SELF TEST
SIMULATE
HART REV
BACK TO MENU
EXIT MENU
00809-0100-4140, Rev AA
VIEW CONFIG
TAG
MODEL
IS PV (*4)
S UNITS (*4)
T UNITS (*9)
OPMODE
DENSTY
F DLY
O DLY
AOMODE (*6)
OFF MA (*7)
ON MA (*7)
S-START
URV (*1)
LRV (*1)
DAMPING (*4)
HIALRM (*8)
LOALRM (*8)
HI SAT (*1)
LO SAT (*1)
ALARM
SECURE
BACK TO MENU
EXIT MENU
LOOP TEST
SET 4MA
SET 20MA
SET CUSTOM
END LOOP TEST
BACK TO MENU
EXIT MENU
ENTER VALUES
LRV
URV
BACK TO MENU
EXIT MENU
APPLY VALUES
LRV
URV
BACK TO MENU
EXIT MENU
Reference Manual
129