M About The Ip100H Settings - Icom IP1000C Instruction Manual

2
SETTING UP THE IP1000C SYSTEM
2. Transceiver settings (continued)

M About the IP100H settings

Set and assign functions to each registered IP100H.
After the settings have been changed, the IP100H needs to be rebooted.
1
Click [Transceiver Settings], then [Transceiver Settings].
• The [Transceiver Settings] screen is displayed.
2
Select the "Unit ID" item to be set, then select and assign functions, depending on your requirements.
3
Click <Apply>.
4
After registration is finished, confirm the registered contents in the "Transceiver Setting List" field.
2-7
q Select
w Enter
Click
Verify