Icom IP1000C Instruction Manual page 103

4
ABOUT THE SETTING SCREEN
9. [Common Settings] Menu
M Common Settings (continued)
!9
@0
@1
@2
(This is only an example.)
!9 TOT ���������
@0 TOT Timer ������
@1 Penalty Timer �����
@2 TOT Beep �������
@3 <Apply> �������
@4 <Reset> ��������
Select whether the IP100H uses the Time-out timer or not. (Default: Disable)
• When "Enable" is selected, the "TOT Timer," "Penalty Timer" "TOT Beep"
items are displayed.
• This function works when the IP100H's PTT switch has accidentally been
held down.
Set the Time-out timer to between 11 and 600 seconds.
The this timer limits the IP100H's continuous transmission.
Set the TOT Penalty timer to between 1 and 30 seconds.
After the TOT timer period ends, the TOT Penalty timer starts and inhibits the
user from transmitting during the penalty period.
Select whether the IP100H uses the TOT beep function or not.
Click to apply the entries.
Click to restore the settings.
• You cannot restore after clicking <Apply>.
4-67
[Common Settings]–[Common Settings]
(Default: 180 (seconds))
(Default: 30 (seconnds))
(Default: Enable)
@ 3 @ 4
K K