Notes
General Notes:
- The unit is type approved according to EN60945 (1997), 4.4, equipment category b) protected from the weather.
- Use of brightness and push buttons may inhibit visibility of information at night.
- Other type approvals applies for the different products. Please see Testing & Approvals Overview section in this
manual for more information.
Safety Considerations
To prevent heat to build up inside the display we recommend installing the unit in a vertical position +/- 40 degrees
maximum. We also recommend adding forced cooling in applications where;
- Vertical mounting angle is above +/- 40 degrees
- Operating temperature is above 25C
- Ventilation area around unit is restricted.
Fans should be mounted to enhance natural airflow directed upwards through the unit.
Appendix
74
IND100077-45