Hatteland HD 12T04 SERIES User Manual page 23

Physical Connections - Series 2 MMC Backpack
3 x USB
PS/2 Keyboard
Supports any USB1.1 (12Mbps) or USB2.0 (480Mbps) compliant peripherals. Drivers for most USB devices are
useally included in operating system or on separate installation CD's delivered with product. USB 1.1 devices will
operate in USB 1.1 mode (12 Mbps).
NOTE: Do NOT exceed the maximum current limit on a USB port. (500mA)
Connect the PS/2 keyboard cable to the PS/2 5P Connector (female) marked with a keyboard icon in the metal casing.
Connect the PS/2 mouse cable to the PS/2 5P Connector (female) marked with a mouse icon in the metal casing. Also
check the illustration above to determine its locations.
Supports 10/100Mbps Ethernet (LAN) and 10/100/1000Mbps Ethernet (GBLAN). Suitable for twisted pair cables
CAT.5E. Make sure the network cable connector "clicks" into the RJ-45 connector.
Will output a clone signal from the computer for use with external display or monitor. Connects via a High Density D-
SUB 15P Female connector. Fasten the cable to the connector using the provided screws on the cable housing itself.
Operation
IND100133-18
Connection area of backpack (illustration)
Network
PS/2 Mouse
LAN
3 x USB INPUT/OUTPUT:
PS/2 Keyboard and PS/2 Mouse INPUTS:
Network LAN/GBLAN INPUTS/OUTPUTS:
RGB OUT:
Network
GBLAN
CF Slot
23
COM1
RGB OUT Power Input