Table of Contents
Advertisement
Quick Links
U S E R M A N U A L
HT B06xM STD - Compact Computer
Where x is Processor Option
HT B06PM STD - Intel® Penitum®M
HT B06CM STD - Intel® Celeron®M Processor
User Manual HT B06xM STD
Updated: 14 Jan 2010
Doc Id: INB100031-1 (Rev 9)
Created:363
For models:
Slim
-A1, -A2, -B1, -B2, -C1, -C2
User Manual
Please visit www.hatteland-display.com for the latest electronic version of this manual.
Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway
Tel: (+47) 5276 3700 - info@hatteland-display.com - www.hatteland-display.com
Advertisement
Table of Contents
Related Manuals for Hatteland HT B06 M STD Series
Summary of Contents for Hatteland HT B06 M STD Series
- Page 1 Doc Id: INB100031-1 (Rev 9) Created:363 For models: Slim -A1, -A2, -B1, -B2, -C1, -C2 User Manual Please visit www.hatteland-display.com for the latest electronic version of this manual. Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway Tel: (+47) 5276 3700 - info@hatteland-display.com - www.hatteland-display.com...
- Page 2 Information in this manual is copyrighted to the respective owners. All rights are reserved by Hatteland Display AS. This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-readable form without the prior written consent of Hatteland Display AS.
-
Page 3: Table Of Contents
Contents Contents ..................3 Contents of package ................4 General ..................5 About this manual ................6 About Hatteland Display ..............6 hatteland-display.com .................6 Contact Information ................6 Computers introduction ..............7 Basic Construction - Compact Computer ........... 8 Product Labels (Example) ..............9 Serial Number Label ..............9... -
Page 4: Contents Of Package
1 pcs of User Manual Note: Separate documentation for third party components, mainboard etc. available on attached DVD. This printed manual only covers specific information for Hatteland Display products and not third party components. INB100031-1 Test Reports papers: 1 pcs of Product Declaration... -
Page 5: General
General INB100031-1 (Rev 9) -
Page 6: About This Manual
About Hatteland Display Hatteland Display is the leading technology provider of maritime display and computer products. We deliver high quality, unique and customized solutions to the international maritime market. -
Page 7: Computers Introduction
We continually develop our marine computers portfolio to make the best use of emerging computer technology so you can be sure that your Hatteland Display computer offers the power needed to run modern applications, with the flexibility to be installed wherever you want, for any marine use. -
Page 8: Basic Construction Compact Computer
Basic Construction - Compact Computer Basic Construction Compact Computer Fan Cover Fan Filter Cabinet Top Cover uDOC Adapter Support Brackets uDOC Disc (option) PCI Raiser Card User Controls 2,5” IDE Drive (option) Processor Fan Processor Cooling Processor Memory Grounding Support Mounting Brackets Power Module (option) -
Page 9: Product Labels (Example)
Product Labels (Example) Serial Number Label Manufacturer & Country Product Type & Serial Number Product Information Manufacturer: Product: Product type: Hatteland Display Computer HT B04PM STD-A1 Serial Number NORWAY HT B04PM STD-A1-121 Description Serial Number Label Nomenclature AA AXXAA AAA-AXX-XXXXXX... - Page 10 This page left intentionally blank INB100031-1 (Rev 9)
-
Page 11: Installation
Installation INB100031-1 (Rev 9) -
Page 12: Installation And Mounting Of Computers
General Installation Recommendations Installation and mounting of computers Units may be intended for various methods of installation or mounting (rack mounting, panel mounting, bracket mounting, ceiling/wall mounting); for details, please see the relevant mechanical drawings. Adequate ventilation is a necessary prerequisite for the life of the unit. The air inlet and outlet openings must definitely be kept clear;... -
Page 13: Physical Overview - Ht B06Xm Std
Physical Overview - HT B06xM STD Connector area of computer Power LED Power On/Off Button Network LAN Reset Button HDD LED Network Gigabit LAN PCI Slot 2 GND Screw PCI Slot 1 Power Input Mouse Port Keyboard Port COM2 FireWire RGB Out USB 3,4 COM1... - Page 14 Physical Overview - HT B06xM STD COM1,2 Serial Ports INPUT/OUTPUT: Supports RS232 using D-SUB 9P Male connectors. Fasten the cable to the connector using the provided screws on the cable housing itself. RGB OUTPUT: Will output a signal from the computer for use with external display or monitor. Connects via a High Density D-SUB 15P Female connector.
- Page 15 Physical Overview - HT B06xM STD Power INPUT: (AC or DC Model) AC MODEL ONLY: The internal AC power module supports both 115VAC/60Hz and 230/50Hz power input using a standard IEC European power plug. INB100031-1 (Rev 9) IND100133-20...
- Page 16 This page left intentionally blank INB100031-1 (Rev 9)
-
Page 17: Specifications
Specifications INB100031-1 (Rev 9) -
Page 18: Specifications - Ht B06Xm Std
Specifications - HT B06xM STD PRODUCT SPECIFICATIONS - HT B06xM STD Note: All specifications are subject to change without prior notice! T E C H N I C A L D E S C R I P T I O N Connector Type: Standard Computer Specifications: •... -
Page 19: Technical Drawings
Technical Drawings INB100031-1 (Rev 9) -
Page 20: Technical Drawings - Ht B06Xm Std-A1
Technical Drawings - HT B06xM STD-A1 INB100031-1 (Rev 9) IND100132-95... -
Page 21: Appendixes
Appendixes INB100031-1 (Rev 9) -
Page 22: Pin Assignments - Common Connectors
Note: The table above lists commonly-used RS-232 signals and pin Pin 1: Video Signal Ground Shield assignments, however Serial Communication for Hatteland Display products may vary from product to product to support different end user systems. Please check additional pin assignments section in this manual for specific RS-232/RS-422/RS-485 pin assignments for your exact product. - Page 23 Pin Assignments - Common Connectors Pin Assignments - 25P Parallel 13 12 11 10 9 8 7 6 5 4 3 2 1 25 24 23 22 21 20 19 18 17 16 15 14 Pin 01 - STROBE This signal indicates to the printer that data at PD7..0 are valid. Pin 02 - DATA0 Parallel data bus from PC board to printer.
-
Page 24: Basic Trouble-Shooting
Basic Trouble-shooting GENERAL ISSUES FOR TFT PANEL BASED PRODUCTS Note: Applies for a range of various products. This is only suitable for general guidance. O PICTURE / LED BEHAVIOUR: If there is no light at all in the LED at the FRONT, check power cables. If the LED in front is green then check if the brightness knob is turned to the right (max brightness). -
Page 25: Ht B06 Specific Trouble-Shooting
HT B06 Specific Trouble-shooting NO SIGNAL OUT/Windows OS: If the HT B06 is booted into Windows without a display/monitor being recognized (cables disconnected, monitor turned off, or KVM switch set to other source), the graphic driver will disable the VGA/RGB output. This will result in no signal output from the HT B06 when it enters Windows. -
Page 26: Declaration Of Conformity
Declaration of Conformity We, manufacturer Hatteland Display AS Åmsosen, N-5578 Nedre Vats, Norway declare under our sole responsibility that the JH MMD, JH MMC, JH STD, JH MIL, HM NMD HM MIL, HM CMD, HT STD, HD MMD & HT MMC product ranges is in conformity with the following standards in accordance with the EMC Directive. -
Page 27: Return Of Goods Information
Return of goods: (Applies not to warranty/normal service/repair of products) Hatteland Display referenced as “manufacturer” in this document. Before returning goods, please contact your system supplier before sending anything directly to manufacturer. When you return products after loan, test, evaulation or products subject for credit, you must ensure that all accessories received from our warehouse is returned. -
Page 28: Terms
Goods are considered delivered to customer when handed over to charterer. 8) FREIGHT / PACKING / FORWARDING FEE Hatteland Display AS charge NOK 50,- in forwarding fee for orders below NOK 1000,-. Freight charge according to expenses for orders above NOK 1000,-. VAT not included. - Page 29 Terms 12) CANCELLATION / RETURN Binding sales contract is concluded when we have confirmed customer’s purchase order. Any disagreements in our order confirmation must be reported to seller within 6 days. The agreement can not be altered without our permission, after acceptance from our supplier.
-
Page 30: Notes
Notes CAUTION This unit contains electrostatic sensitive devices. Observe precautions for handling. Computer Upgrading: Customers who needs to open the computer to change PCI cards, install more memory, or set internal jumpers can do so without voiding the warranty. Before opening a unit’s housing to remove or touch a board, proper ESD measurements must be taken. - Page 31 Notes Appendix INB100031-1 (Rev 9) IND100077-24...
-
Page 32: Revision History
Revision History Rev. Date Notes 01 Dec 06 First final release. 02 Jan 07 Revised specifications (type approval) 02 Feb 07 Revised specifications (type approval) Updated Basic Construction page 04 Jul 07 Revised specifications (type approval) 19 Jul 07 Revised general text elements where needed. 04 Apr 08 Revised specifications (Environmental considerations). - Page 33 Revision History INB100031-1 (Rev 9) IND100077-51...
- Page 34 h attel and-d isp l ay . com...