Table of Contents
Advertisement
Specifications - HD 12T04 BOxx + HT MMC0x-A0x
PRODUCT SPECIFICATIONS - HD 12T04 BOxx + HT MMC0x-A0x
T E C H N I C A L D E S C R I P T I O N
TFT Characteristics:
• TFT Technology
: Color Active Matrix LCD Module
a-Si Thin Film Transistor (TFT)
• TFT Size
: 12.1 inch
• Pixel Number
: 1024 x 768
• Pixel Pitch (RGB)
: 0.24 (H) x 0.24 (V) mm
• Response Time
: 33 ms (TYP) - black to white to black
• Contrast Ratio
: 600:1 (TYP)
: 400 cd/m 2 (TYP)
• Light Intensity
• Viewable Angle
: 45(Up), 55(Down), 70(Left/Right) (TYP)
• Active Display Area
: 245.76 (H) x 184.32 (V) mm
• Max Colors
: 16.7 millions
Global Computer Specifications:
• Installed OS
: Microsoft® Windows® XP Professional w/SP2
• Flash Drive
: 4GB 2.5" Flashdrive ATA-3
• Compact Flash
: Type I & II Compatible (with eject button)
Additional computer specifications are explained in table below.
Power Specifications:
Power Supply Options & Type Numbers:
• 115&230VAC - 50/60Hz
• 24 VDC
Power Consumption:
• Operating
Processor Board / Backpack Options:
HT MMC01-A0y:*
• Processor
: Intel®Pentium®M 1.6GHz Low Voltage, 2MB L2 Cache
• Front Side Bus
: 400Mhz
• Chipset
: Intel® 855GME
• VGA
: Intel® Extreme Graphics2 with 2D/3D Graphics
• BIOS
: Award 2Mbit Flash BIOS
• IDE Interface
: Enhanced IDE UDMA 33/66/100
• Memory
: 1 x DDR333Mhz ECC 512MB (Max 1GB)
HT MMC04-A0y:*
• Processor
: Intel®Pentium®M 745 "Dothan",1.8GHz,2MB L2 Cache
• Front Side Bus
: 400Mhz
• Chipset
: Intel® 855GME
• VGA
: Intel® Extreme Graphics2 with 2D/3D Graphics
• BIOS
: Award 2Mbit Flash BIOS
• IDE Interface
: Enhanced IDE UDMA 33/66/100
• Memory
: 1 x DDR333Mhz ECC 1024MB (Max 1GB)
HT MMC03-A0y:*
• Processor
: Intel®Celeron®M 600MHz, ULV, Zero-Cache
• Front Side Bus
: 400MHz
• Chipset
: Intel® 852GM
• VGA
: Intel® Extreme Graphics2 with 2D/3D Graphics
• BIOS
: Award 2Mbit Flash BIOS
• IDE Interface
: Enhanced IDE supports UDMA 33/66/100
• Memory
: 1 x DDR333Mhz ECC 512MB (Max 1GB)
*Format HT MMC0x-A0y:
x = Processor Option, y = AC or DC Option
T E S T I N G / A P P R O V A L S
EN60945 4 th (IEC945 4 th )
IACS E10
Bracket Models
IND100129-65
: HD 12T04 BOxx + HT MMC0x-A01*
: HD 12T04 BOxx + HT MMC0x-A02*
: 36W (Max) (Brightness+CPU @ 100%)
This product have been tested / type approved by the following classification societies:
DNV - Det Norske Veritas
BV - Bureau Veritas
Note: All specifications are subject to change without prior notice!
M E C H A N I C A L D E S C R I P T I O N
Physical Considerations:
• 296.20 (W) x 252.20 (H) x 84.50 (D) mm (w/cooler & without bracket)
• 11.66" (W) x 9.93" (H) x 3.33" (D) (w/cooler & without bracket)
• 296.20 (W) x 307.39 (H) x 146.51 (D) mm (with bracket)
• 11.66" (W) x 12.10" (H) x 5.77" (D) (with bracket)
• Weight: 5kg (approx)
User I/O Ports:
Behind Rubber Hatch - Front (BOAA / BOAC only):
• USB I/O
Backpack:
• USB I/O
• PS/2 Keyboard & Mouse
• Network LAN
• Network GBLAN
• RGB OUT
• COM1 RS232
• Compact Flash
• If AC Power IN
• If DC Power IN
Behind Rubber Hatch - Backpack:
• USB I/O
Internal - Backpack:
• COM2 Internal
User Controls - BOAA / BOAC:
• Navigator Push Function
• Navigator Rotary Function
• Navigator Indicators
• Navigator On Backpack
User Controls - BOBA / BOBC:
• Navigator Push Function
• Navigator -/+ Buttons Function
• Navigator Indicators
• Navigator On Backpack
Environmental Considerations:
• Operating
: Temperature -15 deg. C to +55 deg. C
- Humidity up to 95%
• Storage
: Temperature -20 deg. C to +60 deg. C
- Humidity up to 95%
• IP Rating
: IP22 (BOAA/BOAC) models (flush mounted only)
: IP66 (BOBA/BOBC) models (flush mounted only)
• Compass Safe Dist. : HD 12T04 BOxx + HT MMC0x-A0x
To prevent heat to build up inside the display we recommend installing the unit in a
vertical position +/- 40 degrees maximum. We also recommend adding forced
cooling in applications where; Vertical mounting angle is above +/- 40 degrees --
Operating temperature is above 25C -- Ventilation area around unit is restricted.
Fans should be mounted to enhance natural airflow directed upwards through the unit.
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Available Options/Accessories:
• Resistive Factory Mounted Touchscreen (BOAC/BOBC) 4wire
• HD 12TBR 020-A1 = Desktop/Ceiling Mount Bracket (included by default)
• HD TBR BPM-A1
= Backpack mount bracket (for stand-alone use)
• HD VESA 12TBR-A1 = VESA bracket for complete unit
• HD 12TBR CMB-A1 = Console Mounting Bracket for complete unit
• VSD100507-1 Split Cable RS422/484 = MALE to 2 x FEMALE 9P D-SUB
NOTE: Products with factory mounted touchscreen is not type approved
& C E R T I F I C A T E S
ABS - American Bureau of Shipping
GL - Germanischer Lloyd
30
: 1 x USB TYPE A
: 3 x USB 2.0 TYPE A
: 2 x PS/2 (female)
: 1 x RJ45 - 10/100Mbps
: 1 x RJ45 - 10/100/1000Mbps
: 1 x 15Pin HD D-SUB (female)
: 1 x D-SUB 9P (male)
: 1 x CF-Slot with eject button
: 1 x Std IEC Inlet (female)
: 1 x Screw Terminals
: 1 x USB 2.0 TYPE A
: Serial Control Interface
: On/Off
: Brightness
: Mode Status LEDs
: On/Off - Push Button Switch
: On/Off
: Brightness
: Mode Status LEDs
: On/Off - Push Button Switch
Standard: 70cm
Steering: 50cm
ClassNK - Nippon Kaiji Kyokai
LRS - Lloyd's Register of Shipping
2/2
Advertisement
Table of Contents
