Cables; Cable Entries & Connectors (Marked Area) - Illustration Only - Hatteland HD 12T04 SERIES User Manual

Series 2 - display and computer backpack range
Hide thumbs Also See for HD 12T04 SERIES:
Table of Contents

Advertisement

General Installation Recommendations

Cables

Use only high quality shielded signal cables for RGB / DVI signals.
Cable Entries & Connectors (Marked area) - Illustration only
Bottom View
Back View
Maximum Cable Length
The signal cables should generally be kept as short as possible to provide a high quality output on the display. The
maximum cable length will depend on the signal resolution and frequency, but also on the quality of the signal output
from the computer. Recommended refresh rate is 60Hz.
Cables up to 10 meters generally provides good picture quality even with a 1600x1200 (UXGA) 60Hz signal. In most
cases (especially with lower resolutions) even longer cables will provide a satisfactory result. This should however be
tested in advance before making the decision on how far the unit can be placed from the signal source.
Installation
19
IND100078-12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hd 15t06seriesHt mmc0* a0 seriesHd 19t03 series

Table of Contents