Table of Contents
Advertisement
Quick Links
U S E R M A N U A L
HT B07CD STD - Maritime Stand-alone Computer
User Manual HT B07CD STD
Updated: 29 Apr 2010
Doc Id: INB100032-1 (Rev 14)
Created:363
Approved: 6987
For models:
Slim
-A1, -B1
User Manual
Please visit www.hatteland-display.com for the latest electronic version of this manual.
Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway
Tel: (+47) 5276 3700 - info@hatteland-display.com - www.hatteland-display.com
Advertisement
Table of Contents
Related Manuals for Hatteland HT B07CD STD
Summary of Contents for Hatteland HT B07CD STD
- Page 1 Doc Id: INB100032-1 (Rev 14) Created:363 Approved: 6987 For models: Slim -A1, -B1 User Manual Please visit www.hatteland-display.com for the latest electronic version of this manual. Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway Tel: (+47) 5276 3700 - info@hatteland-display.com - www.hatteland-display.com...
- Page 2 Information in this manual is copyrighted to the respective owners. All rights are reserved by Hatteland Display AS. This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-readable form without the prior written consent of Hatteland Display AS.
-
Page 3: Table Of Contents
Installation and mounting of computers ...........12 Cables ......................12 Configuring DC power input housing connector ......12 Ferrites .....................13 Physical Overview - HT B07CD STD ............14 Specifications ..................19 Specifications - HT B07CD STD ..............20 Technical Drawings ................21 Technical Drawings - HT B07CD STD-A1 ..........22 Technical Drawings - Mounting bracket ...........23... -
Page 4: Contents Of Package
1 pcs of User Manual Note: Separate documentation for third party components, mainboard etc. available on attached DVD. This printed manual only covers specific information for Hatteland Display products and not third party components. INB100032-1 or -2 Test Reports papers:... -
Page 5: General
General INB100032-1 (Rev 14) -
Page 6: About This Manual
About Hatteland Display Hatteland Displayis the leading technology provider of specialized display and computer products, delivering high quality, unique and customized solutions to the international maritime, naval and industrial markets. -
Page 7: Computers Introduction
We continually develop our marine computers portfolio to make the best use of emerging computer technology so you can be sure that your Hatteland Display computer offers the power needed to run modern applications, with the flexibility to be installed wherever you want, for any marine use. -
Page 8: Basic Construction Fanless Stand-Alone Computers
Basic Construction - Fanless Stand-alone Computers Basic Construction Fanless Stand-alone Computers Chassis with cooling block Powermodule Chassis Power Input Power Module Memory Compact Flash Disk* uDOC Flash Disk(s) Connector plate Duo Processor Mainboard Row of connectors Bottom chassis plate User Controls label Front plate with Serial Number Label General illustration... -
Page 9: Product Labels (Examples)
Manufactured Date yyyymmdd Barcode (TYP+SNO) Serial Number Label Nomenclature AA AXXAA AAA-AX-XXXXXX NOMENCLATURE - A=Letters, X=Numbers HT B07CD STD-A1-000135 Example || ||||| ||| || |||||| || ||||| ||| || ¤----- Serial Number. Due to revisions, numbers may be 1 to 7 digits || ||||| ||| ¤¤-------... - Page 10 This page left intentionally blank INB100032-1 (Rev 14)
-
Page 11: Installation
Installation INB100032-1 (Rev 14) -
Page 12: Installation And Mounting Of Computers
General Installation Recommendations Installation and mounting of computers Units may be intended for various methods of installation or mounting (rack mounting, panel mounting, bracket mounting, ceiling/wall mounting); for details, please see the relevant mechanical drawings. Adequate ventilation is a necessary prerequisite for the life of the unit. The air inlet and outlet openings must definitely be kept clear;... -
Page 13: Ferrites
General Installation Recommendations Ferrites On selected products, the ferrites prevent high frequency electrical noise (radio frequency interference) from exiting or entering the equipment. To verify if your product require this, please see the FIG2 FIG1 “Physical Overview” chapter in this manual. The ferrites are part of the contents of the package also specified in the “Contents Of Package”... -
Page 14: Physical Overview - Ht B07Cd Std
Physical Overview - HT B07CD STD Front / internal area of computer Internal Disk Device Reset Button Power Button HDD LED Power LED Reset Button: (Hard Reset) To reset the computer in case of severe software failure, press this button (it is mounted behind the edge of the casing, to access it use a screwdriver or a pen), This reset button is a hard reset which means the operating system will NOT be warned. - Page 15 Physical Overview - HT B07CD STD Connector area of computer Mouse Port Network LAN COM1 I/O Connector Power Input Audio Line In, Line Out, Mic Composite Out S-VHS Out CF Reader USB 1,2 USB 3,4 Keyboard Port DVI-I DVI-D SPDIF...
- Page 16 Physical Overview - HT B07CD STD COM1 Serial Port INPUT/OUTPUT: Supports RS-232 using D-SUB 9P Male connectors. Fasten the cable to the connector using the provided screws on the cable housing itself. COM2 Serial Port INPUT/OUTPUT: Supports RS-232/422/485 (opto isolated) using D-SUB 9P Male connectors. Fasten the cable to the connector using the provided screws on the cable housing itself.
- Page 17 Physical Overview - HT B07CD STD TV OUT / COMPOSITE OUT: Connect your composite video signal cable into the RCA jack plug. This will output/clone the DVI output, or be software configured to show full screen video playback whilst leaving the operating system desktop free for other uses.
- Page 18 This page left intentionally blank INB100032-1 (Rev 14)
-
Page 19: Specifications
Specifications INB100032-1 (Rev 14) -
Page 20: Specifications - Ht B07Cd Std
Specifications - HT B07CD STD PRODUCT SPECIFICATIONS - HT B07CD STD Note: All specifications are subject to change without prior notice! T E C H N I C A L D E S C R I P T I O N... -
Page 21: Technical Drawings
Technical Drawings INB100032-1 (Rev 14) -
Page 22: Technical Drawings - Ht B07Cd Std-A1
Technical Drawings - HT B07CD STD-A1 INB100032-1 (Rev 14) IND100132-160... -
Page 23: Technical Drawings - Mounting Bracket
Technical Drawings - Mounting bracket HT 00244 OPT-A1 INB100032-1 (Rev 14) IND100132-183... - Page 24 This page left intentionally blank INB100032-1 (Rev 14)
-
Page 25: Technical Drawings - Accessories
Technical Drawings - Accessories INB100032-1 (Rev 14) -
Page 26: Technical Drawings - Mounting Bracket/Cable Tension Relievers
Technical Drawings - Mounting bracket/cable tension relievers HT 00228 OPT-A1 INB100032-1 (Rev 14) IND100132-183... -
Page 27: Appendixes
Appendixes INB100032-1 (Rev 14) -
Page 28: Pin Assignments - Common Connectors
Note: The table above lists commonly-used RS-232 signals and pin Pin 1: Video Signal Ground Shield assignments, however Serial Communication for Hatteland Display products may vary from product to product to support different end user systems. Please check additional pin assignments section in this manual for specific RS-232/RS-422/RS-485 pin assignments for your exact product. - Page 29 Pin Assignments - Common Connectors Pin Assignments - 25P Parallel 13 12 11 10 9 8 7 6 5 4 3 2 1 25 24 23 22 21 20 19 18 17 16 15 14 Pin 01 - STROBE This signal indicates to the printer that data at PD7..0 are valid. Pin 02 - DATA0 Parallel data bus from PC board to printer.
- Page 30 Pin Assignments - Common Connectors (Additional) Pin Assignments - 9P Serial COM RS422 Pin Assignments - 9P Serial COM RS485 4 3 2 1 4 3 2 1 9 8 7 6 9 8 7 6 Pin 01 - N/C Not Connected Pin 01 - N/C Not Connected...
-
Page 31: Basic Trouble-Shooting
Basic Trouble-shooting GENERAL ISSUES FOR TFT PANEL BASED PRODUCTS Note: Applies for a range of various products. This is only suitable for general guidance. O PICTURE / LED BEHAVIOUR: If there is no light at all in the LED at the FRONT, check power cables. If the LED in front is green then check if the brightness knob is turned to the right (max brightness). -
Page 32: Ht B07 / Ht B08 Specific Trouble-Shooting
HT B07 / HT B08 Specific Trouble-shooting Black/Blank Screen problem: Computer has been restarted and operating system (Windows) seems to be booted successfully, but there is no DVI/RGB signal out. Please follow this procedure to re-activate DVI/RGB signal out: - If you are using CRT monitor, press CTRL + ALT + F1 simultaneously. - If you are using LVDS LCD panel, press CTRL + ALT + F3 simultaneously. -
Page 33: Declaration Of Conformity
Declaration of Conformity We, manufacturer Hatteland Display AS Åmsosen, N-5578 Nedre Vats, Norway declare under our sole responsibility that the JH MMD, JH MMC, JH STD, JH MIL, HM NMD, HM MIL, HM CMD, HT STD, HD MMD, HM MMD & HT MMC product ranges is in conformity with the following standards in accordance with the EMC Directive. -
Page 34: Return Of Goods Information
Return of goods: (Applies not to warranty/normal service/repair of products) Hatteland Display referenced as “manufacturer” in this document. Before returning goods, please contact your system supplier before sending anything directly to manufacturer. When you return products after loan, test, evaulation or products subject for credit, you must ensure that all accessories received from our warehouse is returned. -
Page 35: Terms
Goods are considered delivered to customer when handed over to charterer. 8) FREIGHT / PACKING / FORWARDING FEE Hatteland Display AS charge NOK 50,- in forwarding fee for orders below NOK 1000,-. Freight charge according to expenses for orders above NOK 1000,-. VAT not included. - Page 36 Terms 12) CANCELLATION / RETURN Binding sales contract is concluded when we have confirmed customer’s purchase order. Any disagreements in our order confirmation must be reported to seller within 6 days. The agreement can not be altered without our permission, after acceptance from our supplier.
- Page 37 Notes Appendix INB100032-1 (Rev 14) IND100077-24...
-
Page 38: Revision History
Revised Product Labels chapter (page 8) Revised Physical Overview (added SDD 2.5”) (page 11) ECN Revision: 945GM > 945GME (page 16) http://www.hatteland-display.com/mails/23_2009_ecn.html Added mounting bracket with cable tension relievers (HT 00228 OPT) (page 22) Added specific troubleshooting for HT B07/8 (page 28) - Page 39 INB100032-1 (Rev 14) IND100077-59...
- Page 40 h attel and-d isp l ay . com...