Table of Contents
Advertisement
Quick Links
Fixed Position Camera Dome
V3FCD SERIES
INSTALLATION & OPERATION
MANUAL
Vicon Industries Inc. does not warrant that the functions contained in this equipment
will meet your requirements or that the operation will be entirely error free or perform
precisely as described in the documentation. This system has not been designed to be
used
in
life-critical
Copyright © 2001 Vicon Industries Inc. All rights reserved. Product specifications subject to
change without notice. Vicon and its logo are registered trademarks of Vicon Industries Inc.
VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788
TELEPHONE: 631-952-CCTV (2288) FACSIMILE: 631-951-CCTV (2288)
TOLL FREE: 800-645-9116 UK: 44/(0) 1489-566300 INFOFAX: 800-287-1207
Vicon Part No. 8009-8080-00-00 Section 1 Rev 401
situations
and
must
24-Hour Technical Support: 800-34-VICON (800-348-4266)
XX080-00-00
not
be
used
for
this
pur pose.
Advertisement
Table of Contents
Related Manuals for Vicon V3FCD SERIES
Summary of Contents for Vicon V3FCD SERIES
- Page 1 Copyright © 2001 Vicon Industries Inc. All rights reserved. Product specifications subject to change without notice. Vicon and its logo are registered trademarks of Vicon Industries Inc. VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788 TELEPHONE: 631-952-CCTV (2288) FACSIMILE: 631-951-CCTV (2288)
-
Page 2: Fcc Notice
• Plug the equipment into a different electrical outlet so that the equipment and receiver are on different branch circuits. If you are not satisfied with a Vicon product or service, If necessary, the user should consult the dealer or an experienced radio/television I would like to know. -
Page 3: Table Of Contents
Thank you for your purchase of this product. Before operating the product, please 1. Power supply read this instruction manual carefully to ensure proper use of the product. Please (1) Use only with a 24V AC power supply marked class 2 or +12V DC regulated power store this instruction manual in a safe place for future reference. -
Page 4: Parts Descriptions
PARTS DESCRIPTION • Exterior • Camera body interior Inner cover (black) Opening Camera body View angle adjustment lever DC iris level adjustment volume Dip switch Focus adjustment lever Lens Synchronization Video output switch connector for BNC cable(Included) Dome cover (transparent) Coaxial Line phase Body cover (white) -
Page 5: Installation
INSTALLATION Creating a Hole in the Ceiling or Wall Mounting the Camera Body Make two holes for the screws affixing the camera body, and Remove the body cover, and mount • Running cable on one hole for the power and video cables. the camera body to the ceiling or ceiling or wall surface * Use the supplied template to mark the appropriate mounting position... -
Page 6: Adjustment
INSTALLATION ADJUSTMENT Attaching the Service Monitor Setting the Dip Switch When adjusting the camera direction, view angle and focus, Set according to lighting conditions use the included service monitor cable by connecting to the Color V3FCD-24 (NTSC model) video output connector NAME POSITION FUNCTION... - Page 7 ADJUSTMENT Adjusting the Camera Direction Adjusting the Synchronization and Phase Camera body moves in three ways: Pan,Tilt,and Rotate. If necessary, adjust the line phase to synchronize the image. Adjust the direction so that the lens is aiming at the target. Please refer to the drawing below.
- Page 8 ADJUSTMENT Adjusting the DC Iris Level Completing the Adjustment and Installation Set according to lighting conditions. q Attach the body cover. q Turn the dip switch Auto Gain Control (AGC) to OFF. w Use the special screw driver provided and adjust the DC iris level.
-
Page 9: Specifications
SPECIFICATIONS: NTSC SPECIFICATIONS: PAL Model Name V3FCD-24 Model Name V3FCD-24 Focal length 3.0 - 6.0 mm Focal length 3.0 - 6.0 mm Max. Aperture Ratio Max. Aperture Ratio 1:1.2 1:1.2 Iris F1.2-360 (Auto) Iris F1.2-360 (Auto) Angle of view 96.3 - 45.4 Angle of view 96.3 - 45.4 71.9 - 36.0... -
Page 10: Shipping Instructions
Vicon assumes no responsibility for poor performance when cables other than those recommended are installed. In all cases, coaxial cable impedance should be 75 ohms. 1. Call or write Vicon for a Return Authorization (R.A.) at one of the locations Materials listed below. - Page 11 Vicon Industries Inc. Corporate Headquarters 89 Arkay Drive Hauppauge, New York 11788 516-952-CCTV (2288) 800-645-9116 Fax: 516-951-CCTV (2288) &Infofax: 800-287-1207 Atlanta Office Vicon Europe Headquarters 3070AA Business Park Drive Brunel Way Norcross, Georgia 30071 Fareham, PO15 5TX 770-449-0499 800-824-8479 United Kingdom...
Need help?
Do you have a question about the V3FCD SERIES and is the answer not in the manual?
Questions and answers