Power Trim Fluid; Checking - Mercury TDI 4.2L Manual

14. Quickly install the sealing washer and the fill and drain plug. Tighten the plug to the specified torque.
a
b
Description
Fill and drain plug
15. Install the sterndrive propeller. Refer to Propellers.
16. Check the level of the gear lube monitor after the first use. Refer to Maintaining Fluid Levels.
IMPORTANT: The gear lube monitor level will change while the product is in use. Always check the gear lube level when the
sterndrive is cool and the engine is not running.

Power Trim Fluid

Checking

IMPORTANT: Check the fluid level with the sterndrive in the full down (in) position only.
1. Place the sterndrive in full down (in) position.
90-8M0114081 DECEMBER 2015
eng
mc79506-1
All Bravo models shown
a - Fill and drain plug
b - Sealing washer
b
a
19777
Section 4 - Maintenance
b
a
14621
Nm lb‑in
6.8 60
Page 43
lb‑ft
—