Lenovo THINKSTATION P320 30BG User Manual page 72

Figure 18. Installing the thermal pad
5. Insert the new M.2 solid-state drive into the M.2 slot. Then, insert the plug of the retention latch into the
hole to secure the new drive.
Figure 19. Installing the M.2 solid-state drive
6. Position the heat sink on the M.2 solid-state drive adapter. Ensure that the two mounting studs in the
heat sink are aligned with the holes in the M.2 solid-state drive adapter. Then, push the mounting studs
downward to secure the heat sink to the adapter.
62
P320 User Guide