Panasonic KX-TG5621 Operating Instructions Manual page 48

Hide thumbs Also See for KX-TG5621:
Table of Contents

Advertisement

Temporary Confidential
TG56XX.book Page 48 Tuesday, October 4, 2005 2:10 PM
Voice Mail Service
1
{MENU} i {0}{7}{2}
2
Select the desired setting. i {Save}
i {OFF}
Listening to Voice Mail
messages
The unit lets you know that you have new
Voice Mail messages in the following
ways:
– "Voice Mail" is displayed on the
handset.
– The message indicator on the handset
flashes slowly if message alert feature is
turned on.
1
Press {C} or {s}, then press {VM}
within 15 seconds.
L If {VM} is not displayed, the Voice
OR
{MENU} i "V.M. access" i
{Select}
L The speakerphone turns on.
2
Follow the prerecorded instructions.
3
Press {OFF} when finished.
Note:
L If "Voice Mail" still remains on the
display even after you have listened to
new messages, turn it off by pressing
and holding {OFF} until the handset
beeps.
L If your Voice Mail service uses Voice
Mail tones and the message is over 3
minutes long, the handset may not
indicate new messages.
48
Mail access number has not been
stored. Store the number (page 47).
For assistance, please visit http://www.panasonic.com/phonehelp
L If your Voice Mail service uses Voice
Mail tones, the tones are heard from any
phone connected to the same line. If you
want to use another phone to listen to
Voice Mail messages, you have to dial
your access number manually.
Message alert
You can select whether or not the
message indicator on the handset flashes
when new messages have been recorded.
The default setting is "Off".
1
{MENU} i {0}{#}
2
Select the desired setting. i {Save}
i {OFF}
Note:
L The message indicator does not flash for
new messages while the handset is in
use.
L While message alert is on, battery
operating time is shortened (page 17).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents