Preparation; Setting Up The Base Unit - Panasonic KX-TG5621 Operating Instructions Manual

Temporary Confidential
TG56XX.book Page 14 Tuesday, October 4, 2005 2:10 PM

Preparation

Setting up the base unit

Connecting the AC adaptor
Note:
L Use only the included Panasonic AC adaptor PQLV1.
L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
L The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
L The unit will not work during a power failure. We recommend connecting a standard
telephone to the same telephone line or to the same telephone jack using a Panasonic
T-adaptor. Emergency power can be supplied to the unit by connecting a Panasonic
battery back-up power supply noted on page 10.
14
Raise the antennas.
For assistance, please visit http://www.panasonic.com/phonehelp
Fasten the AC adaptor cord.
To power outlet (120 V AC, 60 Hz)
AC adaptor
To single-line telephone jack (RJ11C)
Telephone line cord
Hook