Panasonic KX-TG5621 Operating Instructions Manual page 33

Temporary Confidential
TG56XX.book Page 33 Tuesday, October 4, 2005 2:10 PM
message, the unit does not announce
the caller's name.
L This feature can be turned on or off
(page 38).
Ringer ID and light-up ID
This feature can help you identify who is
calling by using different ringers and ringer
indicator colors for different callers stored
in the phonebook. You can assign a
different ringer and indicator color to each
phonebook item. When a call is received
from a caller stored in the phonebook, the
ringer and indicator color are used after
Caller ID information is displayed.
L Usually the ringer and indicator color are
changed from the 2nd ring.
Ringer ID
You can assign a different ringer tone to
each caller in the phonebook. If you select
"No Ringer ID", the unit uses the ringer
tone you set on page 37 when a call is
received from that caller.
The default setting is "No Ringer ID".
1
Find the desired item (page 29). i
{Option}
2
"Ringer ID" i {Select}
3
Select the desired ringer tone.
4
{Save} i {OFF}
Light-up ID
You can assign a different ringer indicator
color to each caller in the phonebook.
Select "Color1" (Amber), "Color2"
(Yellow-green), "Color3" (Red), or
"Multicolor".
The default setting is "No Light-up ID".
For assistance, please visit http://www.panasonic.com/phonehelp
Caller ID Service
1
Find the desired item (page 29). i
{Option}
2
"Light-up ID" i {Select}
3
Select the desired ringer indicator color.
4
{Save} i {OFF}
33