Do you have a question about the KX-TG5631 and is the answer not in the manual?
Questions and answers
Robert Gasper
February 24, 2025
phone does not ring on incoming calls
1 comments:
Mr. Anderson
February 24, 2025
The Panasonic KX-TG5631 phone may not ring on incoming calls due to the following reasons:
1. Ringer is turned off – Check if the ringer volume is set to off and adjust it if necessary. 2. Call screening is enabled – If call screening is on, it may affect the ringing. Disable it if needed. 3. Message memory is full – If the answering system memory is full, it may impact incoming call functions. Delete unnecessary messages. 4. No link to base – If the handset shows "No link to base," it may not be connected properly. Try re-registering the handset. 5. Power or connection issues – Ensure the base unit is properly connected to power and the telephone line.
Check these settings and connections to restore ringing functionality.
5.8 ghz digital cordless answering system 5.8 ghz expandable digital cordless answering system with two/three handsets 5.8 ghz digital cordless answering system with three/four handsets (70 pages)
5.8 ghz digital cordless phone/5.8 ghz expandable digital cordless phone with two handsets/5.8 ghz digital cordless phone with three handsets (72 pages)
KX-TG5631/KX-TG5632 Model No. KX-TG5633/KX-TG5634 KX-TG5651/KX-TG5652 KX-TG5653 Quick Guide Setting up Base unit CHARGE 7 HOURS Use only the included Panasonic AC adaptor PQLV1 or PQLV256. Press plug firmly. Hook (120 V AC, 60 Hz) To single-line “Click” telephone jack (RJ11C) Noise filter (For DSL Service users) “Click”...
Adding items to the phonebook (Handset) {Phonebook} i {Add} Enter the name (max. 16 characters). i {Next} Enter the phone number (max. 32 digits). i {Next} i {Save} i {OFF} For further information, visit http://www.panasonic.com/phonehelp or refer to Operating Instructions. – –...
Page 3
After the greeting message starts, enter your remote code. (Default remote code is “11”.) L The unit plays back new messages. L After playing back new messages, the voice guidance starts. Follow the voice guidance as necessary. For further information, visit http://www.panasonic.com/phonehelp – –...
AC adaptor and insert the battery into the handset again. Try re- registration as explained later in this guide. Re-registration failed. Your telephone may need service. For further troubleshooting, please visit http://www.panasonic.com/phonehelp – –...
Page 5
Still no dial tone Your telephone may need service. Please visit http://www.panasonic.com/phonehelp for further troubleshooting. – –...
There is no damage to the battery. How can I answer a call- L Press {CALL WAIT} when you hear call-waiting tone. waiting call (2nd call)? For further troubleshooting information, visit http://www.panasonic.com/phonehelp or refer to Operating Instructions. – –...
Page 7
{CALL} until the CHARGE indicator flashes. Complete next step within 1 minute. Handset Press {OK}. Refer to manual to prepare base. Then press {OK} For further registration information, visit http://www.panasonic.com/RegisterYourHandset – –...
Page 8
L FAQs and troubleshooting hints are available. 3 Contact us via the web at: http://www.panasonic.com/contactinfo 4 Call us at: 1-800-211-PANA (1-800-211-7262) L Monday - Friday 9:00am - 9:00pm (EST), Saturday/Sunday 10:00am - 7:00pm (EST) To order a replacement battery, please call: 1-800-332-5368 Or visit: http://www.panasonic.com/batterystore...
Need help?
Do you have a question about the KX-TG5631 and is the answer not in the manual?
Questions and answers
phone does not ring on incoming calls
The Panasonic KX-TG5631 phone may not ring on incoming calls due to the following reasons:
1. Ringer is turned off – Check if the ringer volume is set to off and adjust it if necessary.
2. Call screening is enabled – If call screening is on, it may affect the ringing. Disable it if needed.
3. Message memory is full – If the answering system memory is full, it may impact incoming call functions. Delete unnecessary messages.
4. No link to base – If the handset shows "No link to base," it may not be connected properly. Try re-registering the handset.
5. Power or connection issues – Ensure the base unit is properly connected to power and the telephone line.
Check these settings and connections to restore ringing functionality.
This answer is automatically generated