Viessmann Vitosol 100 Installation Instructions Manual page 10

Installing the fixing frames
Fitting roof ties in the case of plain roof tile integration
4.
7
10
(cont.)
2.
4
3.
1. Mark the position of the roof ties
in accordance with the dimensions
shown in the illustration on
page 7.
2. Remove tiles from the roof tie
location.
3. Hook the roof ties onto the
battens, locate and align on top of
the tile below.
4. Secure the roof ties to the battens.
5. Cover the roof; trim tiles to suit
with an angle cutter. Trim approx.
35 mm off the tiles.
Continue with mounting rail
installation on page 17.