SAFETY RULES
The owner or the employer must instruct the operational personnel on the accident risks, the devices
arranged for the safety of the operator and the user (client), the risks of UV ray emissions and on the
general accident prevention regulations provided for by international directives and by the law in the
country where the appliance is used.
The behaviour of operative personnel must in any case scrupulously comply with the accident-
prevention regulations in the country where the appliance is used.
Before turning the appliance on, the operator must perfectly know the position and function of all the
controls and the characteristics of the equipment. Moreover, the operator must have carefully and
fully read the present manual.
It is absolutely prohibited to obstruct the aeration ducts of the equipment.
Routine and extraordinary maintenance must be carried out with the power to the appliance turned
off.
Any tampering or unauthorized replacement of one or more parts or units of the equipment, the use of
accessories or consumable materials other than the originals or in any case not recommended by the
manufacturer, can represent an accident risk and relieves the manufacturer of any civil and penal
responsibility.
In case of doubt as to the functioning of the timer, do not use the machine.
The UV emitters must only be replaced with identical emitters and by qualified
technical; personnel.
MANUFACTURER'S RESPONSIBILITY.
The manufacturer is relieved of any responsibility in the following cases:
•
Lack of scheduled maintenance.
•
Unauthorized modifications and/or interventions.
•
Use of non-original replacement parts.
•
Complete or partial non-compliance with the instructions.
Seite 8 von 29
Ergoline Vertical
User manual