Remote Control Connection; Routine And Extraordinary Maintenance - ergoline Vertical series User Manual

REMOTE CONTROL CONNECTION

On the external side you have a 6-wire cable, that's outcoming from the back bottom of the unit, to
allow the interfacing to the external control.
In the drawing below you can see how to connect the unit to a generic external control.
230V ac L
N
Internal start
(Start button)
Input 230Vac
For start from
external control
Qmed 48-180

ROUTINE AND EXTRAORDINARY MAINTENANCE

To keep the solarium efficient, carry out the following simple operations:
Clean the lamps with a mixture of water and alcohol (50%+50%) or with specific products for cleaning
glass surfaces.
Clean the acrylic without using detergent products based on alcohol (the surface could become dull
and therefore stop a part of the UV).
Various suitable products are readily available on the market for this purpose.
Clean the equipment (especially the parts in contact) with non-aggressive disinfectant products.
Various suitable products are readily available on the market for this purpose.
Periodically make sure that the air intakes are not blocked with dust or other materials (tissues, etc.).
Periodically replace the lamps and the starters (normally between 400 and 600 hours of work).
Brown
White
Pink
Gray
Yellow
Green
L1
N1
Seite 23 von 29
Ergoline Vertical
User manual
External start