ergoline Vertical series User Manual page 21

8 C O O L I N G
< >
Adjustment of the run-on time. The fan run on time can be adjusted between 30 seconds and 5
minutes by the european version and between 3 minutes and 5 minutes by the US-Version.
The factory setting is 3 minutes.
Press ENTER for the next page:
8a C O O L I N G
<
Pressing < or > buttons you can modify the cooling value with steps of 30 seconds.
9 R E M O T E
< >
Adjustment of using a coin box or a studio control system.
Pressing ENT button the following page will appear:
9a R E M O T E :
<
Selecting < or > you can choose between ENAB and DISAB, that means the unit is controlled
by an external timer (remote control enabled) or by the internal one (disable):
9b R E M O T E :
<
Pressing MEMO button the chosen option is saved.
If the remote control function is enabled, the display will appear as the following page:
9c
This page will come back after 3 minutes without pressing any button; pressing one of the 4
buttons the following page will appear:
9d L E F T
Pressing START button a free potential switch will be closed (start command), and this switch
will remain closed for 5 seconds and then will open again;
E N T E S C
:
> M E M O
C O N T R O L
E N T E S C
E N A B
> M E M O
D I S A B
> M E M O
E R G O L I N E
S T A R T
T I M E 0 0 : 0 0
S T A R T
Seite 21 von 29
Press ESC for going back to page 1
0 3 0 Value 30 is blinking
E S C Press ESC for going back to page 8
Press ESC for going back to page 1
E S C Press ESC for going back to page 9
E S C Press ESC for going back to page 9
E S C Press ESC for going back to page 1
Ergoline Vertical
User manual
ENAB is blinking
DISAB is blinking