DEVA Broadcast DB90-TX Setup Instructions page 11

STEP 6
The Factory Defaults page
Network and WEB server Settings which remain unchanged On completion of the process the settings
should have the proper default values.
Hardware ese R t
This process will fully restore DB90- X to its Factory Defaults, including the Network settings. To start
a Hardware Reset, disconnect the power supply cable from the unit. Then locate the RESET button on
Rear panel, press and hold it. Afterwards, connect the power supply cable to the unit and keep the RESET
button h ld until the PWR led starts blinking. Release the RESET button and ait for DB90- X to reboot e
with the factory default settings.
Rebooting
Firmware pdate U
STEP 7
1. Open Advanced sharing settings by clicking the
search box, type " network
" Change advanced sharing settings
2. Select your current network profile.
3. Click Turn on network discovery
administrator password or confirmation, type the password or provide confirmation.
4. To access the device open a new Explorer bar and click on
the network discovery option, the device will be
WEB browser windo
NOTE : If you have already enabled this function on your computer just open a new Explorer bar and click
on Network . The device must be
Enjoy the work with DB90TX - a product of superb quality and functionality.
For detailed explanations concerning the device refer to its complete manual.
Factory Defaults, Reboot, Firmware Update
T
Network discovery for Windows 7
" , click " Network and Sharing Center
" .
, and then click Save changes If you're prompted for an
w.
displayed
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
To restore DB90- X to its Factory Defaults
you should first press the Restore button. A
new window will appear: confirm that you
want to restore factory defaults and wait for
the process to complete. All settings will be
restored to their factory defaults except for
.
To start Rebooting of DB90- X press the
Reboot button. A dialog warning window will
appear. Confirm that you want to reboot the
device and wait for the process to complete.
To update the device firmware please
select the new firmware file. Press the
Upload button. A dialog window will appear
Confirm firmware update and w
process to complete.
NOTE: The latest Firmware file can be
downloaded from www.devabroadcast.com
Start butto n , and then
" , and then, in the left pane click
Network . If you have successfully enabled
displayed A . double click on
. If no follow the instructions fro t,
- 11 -
T
w T
T
,
ait for the
on " Control Panel " . In the
l
.
DB90-TX will open a new
m Step 7 .
.