DEVA Broadcast DB90-TX Setup Instructions page 13

This Quick user guide will make the installation of DB
ca simplify the process and save yourself extra time and effort n
precautions and the Operating environment recommendations please refer to the User Manual.
NOTE: Preferably, connect the device to a DHCP Server net
address.
STEP 1
To operate the device you need to know its IP Address. In case you are not aware of it, you can hear it
through the headphones when you turn on the the device. Alternatively, use the Network discovery feature
at Local networks ( for reference see tep
1. Connect the device to a local network or to the Internet by a cable with an RJ-45 connector
2. Connect the DB90-RX to the power supply.
STEP 2
Open a WEB Browser and enter the device IP address in the browser's address field
Enter.
The web interface will be displayed to you with the respective main pages Status Configuration;
Factory Defaults Reboot; Firmware Update. ;
STEP 3
Current status information will be displayed comprising Audio Status; Network Status; Connection
Status .
For further reference see the detailed explanation on the right part of the screen.
NOTE: Clicking on the
STEP 4
Click on the Configuration
to the following will appear.
password requested, default values being: ser
user and ass p word: pass
S 9 ).
WEB Interface
Status Section
LIVE DATA
General Settings
button. Dialog box similar
Fill in the username and
u name:
.
- 13 -
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
90-RX quick and easy
. For more information about the Safety
work from which DB90 RX will receive an IP
Connection
icon will toggle live data ON
. Applying these steps , yo
-
;
, then press
: ;
and OFF
u