DEVA Broadcast DB90-TX Setup Instructions page 14

STEP 5
General Network ettings S
If you prefer to use static settings please disable the DHCP and fill in the
information requested - IP Address, Netmask, Gateway, Primary and
Secondary DNS. Otherwise, enable the DHCP.
Web erver ettings S S
In order to enhance the security of DB90-RX you can set new username
and password. A dialog box requesting your NEW username and password
may appear.
NOTE: If sername and asswor u
Other Settings
By choice, you can change the name of the device. Later on it will be used
as a title name on all WEB pages. Customizing the name will make the
device more recognizable.
SNMP Settings
Press the Download button
MIB file. Then specify Agent ID, Agent Port, Community, Manager IP and
Manager Port.
Agent ID is used to identify the device among others when a SNMP
notification is send. Agent - enables/disables SNMPAgent.
STEP 6
Source Priority
DB90-RX has one main and two backup audio sources. If the audio signal
of the main source disappear the device will switch to the first available
backup source.
When the main audio signal is recovered DB90-RX will automatically
switch back to it. Depending on your needs the priority of the connections
should be specified.
RTP Audio Player
Choose a port and decoder.
Icecast Audio Player
Choose a port and decoder. The username and password are used to
secure the connection. Make sure to enter the same on both sides.
IP Audio Player
DB90-RX has one main URL and two alternative Stream Audio Sources
URL2, URL3 . Switching between streams is immediate
current Stream is URL2 or URL3 and connection to URL1 is restored there
will be an instantaneous switch back to URL1.
If the server does NOT use Port 80 you should enter URL and Port
Encoder . For example 192.165.1.21
NOTE: The selected players' decoders must match the settings of the
encoder devices on the other side of the connection.
Analog Audio Output
Adjust the analog output level of the device.
STEP 7
Audio Loss and Audio Recover
Select the appropriate levels of loss and recovery of the audio signal.
Do not forget to set the timeout.
Set wether the loss of audio should be registered by the one channel only
or for both of them.
Network Configuration
p d fields are left blank,
to download the
I P Audio Configuration
:2100 .
Backup Audio Configuration
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
NO security is used.
proper DB90 RX SNMP -
on audio loss . When
of the
- 14 -