123B/124B/125B
Users Manual
Reading Smoothing
To smooth the readings on A:
1.
Push to open the Scope and Meter button bar.
2.
Push 3 to open the INPUT SETTINGS menu.
YZ
3.
Use
to highlight the Readings as Smooth.
4.
Push to make the change.
5.
Push 4 to exit the menu.
For best results, set Readings to:
•
Fast for short averaging, fast response
•
Normal is the default setting
•
Smooth for long averaging, stable readings
How to Display the Envelope of a Waveform
The Test Tool records the envelope (minimum and
maximum) of the live waveforms for inputs A and B.
Repeat the first two actions of Smoothing the Waveform,
and then do the following:
To display the waveform envelope:
1.
Push to open the Scope and Meter button bar.
2.
Push 2 to open the SCOPE SETTINGS menu.
YZ
3.
Use
to highlight the Type as Envelope.
26
4.
Push to make the change.
5.
Push 4 to exit the menu.
The screen shows the resultant envelope waveform. You
can use Envelope to observe the variations in time or
amplitude of input waveforms over a longer time period.
hxv18.eps