Introduction For Buttons On Remote Control - Prem-I-Air EH0539 User Manual

Introduction for buttons on remote control

Note:
●
This is a universal remote control for all models in this series. Not all the
functions on the control may be on your unit. Please check before using.
● When the power is connected and the unit is in standby mode you can operate
the air conditioner with this remote control.
● Pressing a button on the remote control will cause the sending icon to flash.
The unit will bleep after receiving this instruction.
1
ON/OFF button
Press this button to turn unit on/off.
2
MODE button
Pressing this button once can select your required mode circularly as below (the
corresponding icon "
● When selecting auto mode, air conditioner will operate automatically according to
ambient temperature. Set temperature can't be adjusted and won't be displayed
either. Press FAN button to adjust fan speed.
● When selecting cool mode, air conditioner will operate under cool mode. Then
press + or - button to adjust set temperature. Press FAN button to adjust fan speed.
● When selecting dry mode, air conditioner will operate at low fan speed under dry
mode. In dry mode, fan speed can't be adjusted.
● When selecting fan mode, air conditioner will operate in fan mode only. Then
press FAN button to adjust fan speed.
3
+ / - button
● Pressing + or - button once will increase or decrease set temperature by 1°F(or
°C). Hold + or - button for 2s, set temperature on remote controller will change
quickly. Release the button after your required set temperature is reached.
● When setting Timer On or Timer Off , press + or - button to adjust the time.(See
TIMER Button for setting details)
" will be lit up after the mode is selected):
AUTO COOL DRY FAN