Function Introduction For Combination Buttons; Replacement Of Batteries In Remote Controller; Child Lock Function - Prem-I-Air EH0539 User Manual

Introduction on remote control
Note:
● Range of time setting is: 0.5~24h
● The interval between two motions can't exceed 5s, otherwise the remote
controller will exit setting status.

Function introduction for combination buttons

Child lock function

Press "+" and "-" buttons simultaneously can turn on or turn off child lock function.
When child lock function is started up, LOCK indicator on remote controller is ON.
If you operate the remote controller, remote controller won't send signal.
Temperature display switchover function
Under OFF status, press "-" button and "MODE" button simultaneously to switch
between °C and °F.

Replacement of batteries in remote controller

1. Press the mark " " on back cover of batteries box cover for remote controller with
fingers as shown in the fig, and then remove the batteries box cover along the arrow
direction.
2. Replace with two #7 (AAA 1.5V) dry batteries.
Make sure positions for "+" pole and "-" pole are
correct.
3. Replace batteries box cover.
NOTICE
● The distance between remote control and unit should be no more than 8m,
and there should be no obstacles between them.
●
conditioner when using the remote controller.
● Replace new batteries of the same model when replacement is required.
● When you don't use remote controller for a long time, please take out the
batteries.
Battery
Reinstall
Cover of battery box
Remove