Suzuki LT-A400 Service Manual page 273

• Apply SUZUKI SUPER GREASE "A"
to the anchor pin and
brake camshaft sliding surface slightly.
,.@<9900()'25030: SUZUKI SUPER GREASE " A" (USA)
9900().25010 : SUZUKI SUPER GREASE " A" (Others)
A
WARNING
Be careful not to apply too much grease to the brake
camshaft and pin. If grease gets on the lining, brake
slippage will result.
• Install the brake shoes and springs to the brake panel.
ICAUTION I
Replace the brake shoes 8S a set, otherwise braking
performance will be adversely aHected.
NOTE:
• When reinstalling the removed brake shoes, install them in
their original position (leading or trailing).
• Make sure that the brake shoe spring's end faCBs the brake
panel as shown.
• Install the brake drum
CD.
• Install the new O-rings
~
to the brake drum
<D.
• Apply SUZUKI SUPER GREASE "A" to the spline on the rBar
axle.
,.@<9900()'25030: SUZUKt SUPER GREASE " A " (US A)
99000-25010: SUZUKI SUPER GREASE " A " (Others)
I CAUTION I
O-rings should be replaced with new ones.
~.
CHASSIS 7·57
.
~ . ,..
'0
., '(Ii""';; .
( • J
S)
.
'
¢:o
'=.