Shock Absorber; Remounting The Shock Absorber; Engine - Malaguti CENTRO SO 4T Service Manual

50 cc - 4 T
SHOCK
ABSORBER
Support the central
part of the frame.
• Top nut (Ds)
• Lower screw (Vi)
• Remove the upper screw
(Vs).
• Extract the shock absorber.
F. 123

ENGINE

• Remove beforehand:
- Rear fairing (page 35)
- Lower fixing screws, shock absorber
- Air filter unit (page 47) (not compulsory)
- Muffler (page 55)
REMOUNTING THE
SHOCK ABSORBER
• First fit the upper screw (Vs) with the
washers and the nut (Ds).
• Then the lower screw (Vi), with the
D
S
washers and the lower nut (Di).
Vs
V
i
40 ± 15%
Vi
40 ± 15%
It is essential that all the tube and cable ties are cut from the engine and all
relevant connectors are disconnected.
After remounting the previously removed components, all cables, pipeli-
nes and ties should result as they were originally; in concern to this, care-
fully consult the following pages.
48 07/08
V
s
D
S
D
i
V
i
F. 124