• Soak the filtering element in a special solvent solution for filters, for a few minutes.
• Squeeze the filter (wearing rubber gloves) until all traces of the solvent are eliminated.
• Apply oil for air filters on the entire surface of the filter, eliminating any extra oil; the result should be a uniformly impregnated filter without excess oil dripping off.
• If the filter element is damaged, replace it with a new original one.
When remounting the air filter unit, check that the seal (C) is correctly inserted in the relative housing.
Left side
• V1.
V
V
S
• Release the clamp (A) and remove the exhaust unit.
V
2
• Refer to the picture to reach the air filter (B).